Article Scholar

Mildew Resistant Paint For Mildew Prevention

Whether we live in a densely wooded place with little sunlight or stay next to an ocean, many homeowners face problem of mold and mildew in their homes. The mildew and mold problem is caused by fungus that feeds and grows on moist surfaces. Even, if one cleans the surface of the walls by themselves, it can be a difficult task that causes a lot of hassles. Instead of taking chances by using standard paints, one can go for mildew resistant paint as a precautionary measure. This simple choice can help to save thousands of dollars; otherwise it can end up with moisture problem in the homes. Mildew resistant paint is used for many purposes, one has to know the options where and how it can be used.

Mildew resistant paint used for interior walls

The main use of mildew resistant paint in homes is to paint the interior walls. For basements, this is a true option. Whether the home contains a basement or a store room, selecting mildew resistant paint to color the walls of the room is a spending that nobody regrets. Every imaginable tone color is available for wall painting. Once this protective paint is selected, one can go for any color like beige to more exciting colors like charcoal, red, charteuse.

We can use this paint not only in basements, but also in other parts of the home. If one wants to change their attic space into child’s room or study room, add a coat of resistant paint. Moisture problems can develop in attic ceilings due to cold spaces. When this protective paint is used for the walls while renovating, moisture problems can be stopped from occurring.

Mildew resistant paint used for exteriors

Humid climates can also cause mold and mildew issues on the exterior walls of the homes. Even the eavestroughs and garage doors, which cannot tolerate the humid climates, need protective coating to avoid damage. Mildew can form slowly or forms very quickly in hot summer and tropical months. When one chooses protective paint for exteriors to prevent the damage in summer and rainy season, homeowners can considerably decrease their expenses later in the future. If homeowner is wise, they will select protective paints to protect their exterior walls instead of going for normal paints. Every area that is susceptible for mildew should be painted with protective paint.

A homeowner should be fully aware of all the paint options so that they can make wise choices and wise investment for their home. For some homeowners, initially it will be a burden to go for protective paints, but on the long run it will be a saving and worth the investment. People, who rip out the walls and insulation due to mildew problems, can demonstrate the expenses saved by using mildew resistant paint. There is an old saying of pay now otherwise pay later surely applies to precautionary home improvement attempts. If one is concerned about the health problems that come with mold and mildew issues, then investing in protective mildew paint is worth the money than spent.

Matt works with Majestic Roofing, your source for finding a reputable handyman OKC homeowners recommend for quality repairs and home improvement.

The Lovastatin Vs Lipitor Debate

While a healthy diet is the best way to ensure good health, many people are using drug supplements to help with issues of health. This includes taking a drug to keep cholesterol low, but a doctor should always be involved when making this decision.
While all drugs vary in effectiveness, cost, and side effects, the constant is they should consult with a doctor before deciding which is best for them. One of the constant comparisons in cholesterol lowering drugs is Lovastatin vs Lipitor.


Cost is one of the first things that people consider when they are choosing which drug they will choose for themselves. Lipitor costs much more than Lovastatin. Of course, there are things to consider when considering the price, and this includes the sort of insurance you carry, and how your policy is set up. Lipitor can cost as much as one dollar per pill, sometimes even more. Lovastatin is available in a generic form, and for that reason the cost can be as little as ten to twenty dollars for a prescription that will last three months.


There are good qualities to both drugs, but Lipitor is regarded as the one that makes the most drastic reductions to your cholesterol level. It also is able to do so in small amounts for most patients, while Lovastatin is not as effective. In fact, while as little an amount as 10mg is all that is needed with Lipitol, Lovastatin can require much more while still not being as effective. Often, a patient will need as much as 40mg of Lovastatin to do what the much lower dose in Lipitor does.


Atrvastatin is the key ingredient in the Lipitor pill. It reduces a coenzyme that is the main reason you produce extra LDL cholesterol. Lovastatin, is more of an ingredient itself, rather than a product, and it is derived from Asperigillus Terreus, which is a microorganism.

Side Effects

Side effects and their severity differ from person to person, and depend upon how much of the drug the person takes. The most common side effects in Lipitor have been nausea, diarrhea, upset stomach, a sore throat and runny nose, and pain in the joints. These can range from mild to extreme. The most severe effects will include hives, difficulty urinating, and a yellowing of the skin.

Lovastatin also has some of these side effects, and includes possible fever, a tightening of the chest muscles, and bladder pain, although diarrhea is not among its side effects.


These drugs are each unique in their own way, but the less you need to take of a drug, the better. Many people find that the higher cost of Lipitor is offset by the smaller doses they need. Smaller doses also cause fewer side effects. For most people, they choose the better known Lipitor. However, there are many people who find they garner all the benefits they need from Lovastatin.

Matt works with Integris Health center. Integris physicians perform a variety of transplant procedures, including liver transplant and organ donation.

Take Care When Cleaning Your Car Engine

All car enthusiasts who love their vehicles will want to know how to clean a car engine. Many people take great pride in their cars, and therefore having it shiny new at all times is paramount. Before you decide to do this, however, you need to know the proper method. This way, you can avoid doing damage to the engine.

There are many delicate components located under the hood. These are not designed to get wet. Therefore you need to know how to clean the actual engine in the correct manner. This could mean the difference between a smooth running car, or an expensive repair.

Step One: Getting Rid of Dust

One of the main problems when cleaning your car’s engine is getting rid of the fine dust layer that normally coats all surfaces beneath the hood. In order to get rid of the dirt and prevent it from being pushed further into the motor, a shop vac and brush can be used. This way, you can suck up as much dust as possible.

This is of course one of the more difficult steps. In order to get rid of the remaining dust, dampen a rag with all purpose cleaner. Now, gently wipe the motor’s surfaces after making sure the engine is cool.

Step Two: Getting Rid of Grease

Trucks for sale in Oklahoma will often have seemingly brand new, sparkling engines. This is mainly because the dealers take extra care when it comes to getting rid of grease. For this, you will need a degreaser.

There are special kinds of degreaser out there which have been designed for the car’s engine. A degreaser is usually strong enough to get through the thick grease which builds up on the motor, without damaging the delicate parts.

Make sure to spray the degreaser thoroughly, and then wait. A good degreaser usually does all of the work for you, so all you really need to do is sit back and allow it to finish.

Wait for about ten minutes. Using a low pressure hose, you can then rinse the degreaser off the motor itself. It is important not to use high pressure, however. Try to avoid spraying electronic components directly.

Step Three: Steam Clean the Engine

When you go shopping for used cars Oklahoma, many dealers will usually steam clean in order to remove dirt which is difficult to get rid of using other techniques.

All that is needed for this will be a steam gun. This part is normally skipped when people try to clean their engines, but it usually delivers some of the best possible results. You need to turn the steam on full blast first. Carefully work your way around the affected areas, but use quick blasts of the steam. With a Chrysler Oklahoma, winds can normally put dirt into the smaller crevices of the actual motor. Make sure to take the time to look after these.

It can take some time to perfect this process. There is no one correct method, and it depends entirely on the type of car you have. Always make sure to be careful and try not to damage the engine when you are cleaning your vehicle.

Writer Matt works with David Stanley Dodge, the source for used cars Oklahoma drivers trust.

Sally Field Plastic Surgery Could Create A More Youthful Appearance

Many female movie stars such as Sally Field find that it is difficult to grow old in the movie business when they have worked as actresses in front of the cameras for many years. Sally Field has announced in some of her past interviews that she would never have plastic surgery. In 2007, Sally stated that along with the famous beauty Jane Fonda, she would grow old gracefully without ever having plastic surgery.

Sally Field started out on television as a teenage sitcom star. As she grew older, her youthful appearance allowed her to pass for a much younger person. Even though she is long past her sweet young image, Sally Field plastic surgery rumors always circulate each time she starts a new project. A few years after she said she would never have plastic surgery, she made an announcement that she might consider having it done. Here are some of the procedures that plastic surgeons might recommend for Sally Field and any other woman considering plastic surgery.

Potential Sally Field plastic surgery – Eyes and forehead area

One potential type of Sally Field plastic surgery would be having the skin tightened on the forehead and near the eyes. Botox could also be injected in the eye area and forehead to reduce wrinkling and the appearance of frown lines.

Some observers have suggested that Sally Field’s drooping eyebrows make her look older and should be addressed. However, she always had drooping eyebrows so it is not likely to be a major factor in her appearance. There are plastic surgeons who prefer to keep the original look of the face when they recommend any procedures to create a more youthful appearance. Because the features of Sally Field’s face are already so familiar, it would be wrong to make major changes to her appearance instead of just creating a fresher look.

Sally Field’s smile lines and creases

A potential Sally Field plastic surgery procedure might address her smile lines and creases. Every woman develops these lines as she gets older. It is important to create a natural look. Sally Field has very full cheeks so she will not require any more dermal fillers to be injected here. A surgeon could help improve areas such as her laugh lines near her mouth using injectable fillers.

Neck area may indicate potential Sally Field plastic surgery

It is possible that Sally Field may wish to have the skin on her neck area tightened up. Surgeons often suggest that women who have developed fine lines in this area can benefit from having the skin lifted and tightened here. In some cases, there are large areas of the skin surface that are treated. However, it is possible that having a lot of work done here will create a look that is unnatural. Fortunately there are alternatives to having a lift in this area. For example, the Fraxel repair laser can be used successfully. In this method, the laser is focused on small areas of the skin. The laser resurfaces the area in a way that is not invasive and results in a natural look.

For more information or to schedule a consultation, visit

Carpet Maintenance: Hoover Steam Vac Instructions

A regular household vacuum helps keep carpets looking fresh and new, but now and then any carpet will need a more thorough cleaning using a more powerful device such as a steam vacuum. A Hoover steam vac features a steaming action that loosens dirt from carpet fibers before the vacuum removes it.

When carpets need the heavy-duty cleaning action of a steam vac, these simple Hoover steam vac instructions will help bring them back to a nearly new appearance.

Five steps to a steam-cleaned carpet

1) Before steam cleaning, get as much furniture out of the way as possible. This lets the machine get to all of the carpet rather than only the areas that are easily accessible. Large pieces of debris should also be picked up by hand. As a final preparatory step, the carpet should be vacuumed with a normal vacuum cleaner.

2) To work properly, a Hoover steam vac must be loaded with hot water and an appropriate cleaning solution. A bottle of cleaning fluid should come with the package. If this is not the case, a local appliance vendor or hardware store should be able to supply the right product.

To fill the machine, add hot tap water to the cleaning solution tank along with the suggested amount of carpet shampoo–this information can be found in the Hoover steam vac instructions. Use care when filling the machine and be aware of the fill line to prevent overfilling or damage to the device.

3) Once the vacuum is filled, the next step is to start the brushes on the bottom of the machine. Just flip the switch found near the base.

Multiple speeds may be available. The appropriate speed depends on both the depth of the carpet and the amount of dirt in it. Hoover steam vac instructions may contain specific suggestions for particular models of steam vac.

4) To initiate the steam cleaning procedure, hold down the trigger near the handle. This causes the machine to emit a quantity of cleaning solution and also starts the motion of the scrubbing bristles. It also starts the suction motor that will extract the dirty water and send it to the used water tank.

When the machine is running well, move it back and forth over a small area of the carpet. This reciprocal motion makes sure the steam vac covers the entire carpet. When this area is clean, move on to the next bit. Be sure to overlap the last cleaned area to prevent streaks.

5) Once the entire carpet has been steam cleaned, the operator may choose to vacuum over it again to remove any excess water. Then clean the machine by emptying and rinsing both tanks. Do not replace the tanks in the machine until they are well dry. Only then reassemble and store the machine until its next use.

Steam vacuums are a very useful tool that can add years of life to a carpet. Following the detailed Hoover steam vac instructions for the use and maintenance of the device will keep it in shape to clean carpets for many years.

Greg works with Quality Flooring Company of Oklahoma City. Find out more about them and more flooring tips when you visit their website.